background image

Black

Mass

Salem, Ma. 01970

The Missionary Fuzz V2 is the new and improved 

version of the first pedal Black Mass released. V2 

features new artwork, two new controls (Pregain and 

Bass), and transformer based pickup simulation to 

allow the fuzz to be placed anywhere in your signal 

chain with no buffer issues. The Missionary Fuzz V2 

uses a special mix of silicon transistors to get just 

the right textures and output.  

 

All Black Mass pedals are built in Salem, MA with a 

little bit of magic and a whole lot of love.  

 

Enjoy.  

 

CONTROLS: 

Level: Controls overall output level.

Pregain: Controls the amount of signal going into 

the fuzz. This comes after the pickup emulator and 

simulates rolling your guitar volume knob down.

Body: Controls the mids notch in the pedal. All the 

way clockwise is flat, all the way counter-clockwise 

is scooped into oblivion.

Fuzz: Controls the fuzz saturation. Works in tandem 

with Pregain control for a full range of sounds.

Bass: Controls the amount of bass entering the 

circuit. This control is pre-fuzz to prevent low end 

blow out, and maintain articulation.

Internal Switch:

 

This slide switch controls whether 

the transformer simulates the impedance of a single 

coil pickup or a humbucker. Left is single coil (stock), 

right is humbucker. The difference is subtle, but it’s 

there for you to experiment with. Back cover must be 

removed to access this switch.

POWER:

 

•Standard 2.1mm center negative power only. 

•9V DC ONLY! 

•Do not run at higher voltages. 

•Current Draw: 45mA.

•Use an isolated pedal board power supply. 

CONNECT:

 

Stay up to date with us and show us your gear! We 

don’t want to line the pockets of the corporate fat 

cats, so we don’t run any ads. We rely heavily on 

people like you to help us get the word out. Throw us 

a like, a follow, or even a post if you really like us. 

Instagram: @blackmasselectronics

Twitter: @blackmassfx 

#blackmasselectronics

NOTES:

 

•The onboard transformer in this pedal makes it 

impervious to the typical buffer/fuzz issue. Put it 

after a reverb for a huge wall of sound. Or put it after 

your buffered tuner like normal. Do whatever you 

want, just enjoy the process. 

MISSIONARY FUZZ V2

www.blackmasselectronics.com

Reviews: