manualshive.com logo in svg

Black Bruin BB 4, Product Manual

Share
Download
Black Bruin BB 4 Product Manual Download Page 69

Special Instructions

Storing the motor

During short term storage of the motor, the following should be taken into

consideration:
• Cover any pressure openings and open threaded holes with suitable caps.
• Protect the unpainted surfaces from dirt and moisture.
• Store the motor in a dry place with relatively stable temperature.
• The motor should not be stored in a same place as substances with aggressive

corrosive nature (solvents, acids, alkalis and salts).

• The motor should not be exposed to strong magnetic fields.
• The motor should not be exposed to strong vibration.

Note:
For long-term storage (over 9 months) the following additional actions are

recommended:
• Damages to surface paint must be repaired.
• Protect the unpainted surfaces with suitable anti-corrosion treatment.
• Fill the motor completely with hydraulic fluid.
If these instructions are followed, the motor may be stored for

approximately two years. However, as storage conditions do have a

significant effect, these times should only be considered as guide values.

8

8.1

Special Instructions

Product Manual

69

Summary of Contents for BB 4







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands