Black Box TS250A, Manual, Page: 47 / 64

Ports, LEDs, and power connectors
Chapter 4 Aggregator TAPs
47
rev. 1
Other things to consider:

“Can I daisy chain an Aggregator TAP?” on page 52

“Can I “team” NICs in my analyzer?” on page 53
Ports, LEDs, and power connectors
This section provides a brief overview of installing the TAP and
understanding the status LEDs.
Figure 11 Aggregator TAP front panel
Both power connectors are located on the back panel, along with the
model information and serial number. You can supply power to either
or both power supply sockets. Connecting both sockets to different
external power sources (using Network Instrument’s optional adapter
kit TC2P-K) provides fail-safe power redundancy for the Analyzer
side. The network pass-through link remains unaffected even if power
to the TAP is interrupted.