36
SCSI SWITCH (FOR AS/400
®
)
The monitor will print:
Clearing data buffers
Ready to download ASCII file...
Press the <Page Up> key. This brings up the file upload
menu in Procomm. Enter an A for ASCII file transfer.
Procomm will then prompt for the file name. Enter it and
press return.
<Page Up>
A
Please enter file name: UCODESW.ABS
Once the file name is entered, Procomm will display a
status bar at the bottom of the screen telling how many
lines have been transferred and that an upload is in
progress. Once all of the data has been transferred, the
monitor should print:
File transmission successful.
Starting flash programming...
A series of dots will slowly be displayed. This indicates that
the flash is being programmed. Do not turn off power
while the dots are being displayed.
............
Once the flash is reprogrammed the monitor will display:
Flash reprogrammed.
New microcode effective on next power cycle.
To make the controller code effective, use the monitor’s
RST command or cycle power to the SCSI Switch.
File download can be aborted while the Procomm status bar
is displayed by pressing the <esc> key twice. The monitor
should print:
File download aborted or failed.
If the reprogramming failed for any reason, try it again.
Depending on the error, it will usually work the second
time.