15
SCSI SWITCH (FOR AS/400
®
)
Figure 3-4. Two AS/400 Hosts, One IBM 3490E.
To configure either tape drive on SW2, follow the cabling instructions
listed above, but attach the cables to the top row of connectors.
NOTE
Replace the existing cable between the tape drive and the IOP
and replace it with the cable supplied with the switch.
With tape drives mounted side by side, the lower connectors will control
the tape drive on the left; the upper connectors will control the tape drive
on the right.
HOST A
HOST B
TAPE
SCSI SWITCH for AS/400
®
IBM CABLE
IBM
3490E
TERMINATOR
TO TAPE
DRIVE
NOTE: REMOVE INTERPOSER
Cables supplied
with the Switch
(Supplied with
the tape drive)