37
CHAPTER 6: Operation
To connect PM Switch ports, take these steps:
1. Access the PM Switch Command Mode.
2. Invoke the /C command to connect the desired ports.
a)
Resident Connection:
To connect your resident port to another port,
type “/C
nn
” (where
nn
is the number or name of the port you want
to connect to), then press [Enter].
Examples:
To connect your resident port to Port 8, type “/C 08 [Enter]”.
To connect your resident port to a port named “MODEM,” type “/C
MODEM [Enter]”.
b)
Third-Party Connection:
To connect any two ports (other than your
resident port), type “/C
nn NN
” (where
nn
and
NN
are the numbers
or names of the two other PM Switch ports, then press [Enter]..
Examples:
To connect Port 5 and Port 6, from a third port with “All” command
capability, type “/C 05 06 [Enter]”.
To connect a port named “SALES” to a port named “MODEM”
from a third port with “All” command capability, type
“/C SALES MODEM [Enter]”.
When you send a /C command with a port name, it is only necessary to enter
enough letters to differentiate the desired port from other ports. For
example, if you want to connect your resident port to a port named “SALES”,
and no other port names begin with the letter “S,” you can send just “/C S”.
Summary of Contents for SW545A
Page 63: ...64 PORT MANAGER SWITCHES NOTES...