Black Box ServTray KVT415A-R2, Manual, Page: 8 / 20

Share

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Page: 8 / 20

Black Box ServTray KVT415A-R2 Manual Download Page 8

724-746-5500 | blackbox.com

Page 8

KVT415A-R2

724-746-5500 | blackbox.com

Chapter 2: Overview

• (10) 0.12" x 0.24" (0.3 x 0.6 cm) screws

• This user’s manual

Accessories that you might or will need to purchase include:

• 12-24 or 10-32 nuts/bolts (you might need these to mount the KVM tray in the rack/cabinet)

2.3 KVM Switch Module Compatibility

• KVT6S1UV (1-Port DVI/VGA USB and PS/2 Module, part number KVT6S1UV with user’s manual)

• KVT4S8PV (8-Port VGA USB and PS/2 Module, part number KVT4S8PV with user’s manual)

• KVT4S8UV (8-Port VGA USB and PS/2 Module, part number KVT4S8UV wiht user’s manual)

• KVT4S16PV (16-Port VGA PS/2 Module, part number KVT4S16PV with user’s manual)

• KVT4S16UV (16-Port VGA USB and PS/2 Module, part number KVT4S16UV with user’s manual)

• KVT1IP1UV (1-Port USB and PS/2 IP enabled Module, part number KVT1IP1UV with user’s manual)

• KVT1IP8UV (8-Port VGA USB and PS/2 IP enabled Module, part number KVT1IP8UV with user’s manual)

• KVT1IP16UV (16-Port VGA USB and PS/2 IP enabled Module, part number KVT1IP16UV with user’s manual)

• KVT8CATUV (8-Port CX CATx Module, part number KVT8CATUV with user’s manual)

• KVT16CATUV (16-Port CX CATx Module, part number KVT16CATUV with user’s manual)

• KVT1IP8CATUV (8-Port CX CATx Module, part number KVT1IP8CATUV with user”s manual)

• KVT1IP16CATUV (16-Port CX CATx Module, part number KVT1IP16CATUV with user’s manual)

• KV4IP16CATUV (16-Port CX CATx Module, part number KVT4IP16CATUV with user’s manual)

2.4 Universal Rear Mounting Brackets

Figure 2-2 shows the rear bracket pair, and Figures 2-3 and 2-4 show the ServTray in its maximum and minimum extension
positions.

Figure 2-2. Rear bracket pair.

NOTE: The lengths in Figures 2-3 and 2-4 are the depths measured between the front pole and rear pole inside a 4-post rack or

cabinet, not the outside depth of the enclosure.

45.3"

(115.1 cm)

Figure 2-3. The maximum depth of the unit.

«
...
6
7
8
9
10
...
»

Summary of Contents for ServTray KVT415A-R2





















Reviews:

No comments