Black Box ServSwitch TDX, User Manual, Page: 6 / 21

















®
Installation
Locations
Please consider the following important points when planning the position of
the ServSwitch TDX unit:
• Situate the ServSwitch TDX unit close to the systems to which it will be
connected. The ServSwitch TDX does not require a power supply providing
that its connection cables are no longer than 2 metres.
• Thanks to the remote control, the ServSwitch TDX unit can be situated out
of sight within the cabling cradle of a desk or adjacent to the systems.
• Consult the precautions listed within the Safety.information section.
SECT 3
Mounting
Before you begin connecting to the keyboard, mouse and source systems, it is
advisable to mount the ServSwitch TDX unit in place, either:
• On a horizontal surface using the supplied self adhesive feet, or
• Amongst the cabling at the rear of the desk.