®
LNK
PW
R
BLACK
BOX
CXQua
d IP
Global users (IP network port)
The ServSwitch CX Quad IP provides an
autosensing Ethernet IP port that can operate
at 10 or 100Mbps, according to the network
speed. The ServSwitch CX Quad IP is designed
to reside quite easily at any part of your
network:
• It can be placed within the local network,
behind any firewall/router connections to
the Internet, or
• It can be placed externally to the local
network, on a separate sub-network or with an open Internet connection.
Wherever in the network the ServSwitch CX Quad IP is situated, you will need to
determine certain configuration issues such as address allocation and/or firewall
adjustment to allow correct operation. Please refer to
the Configuration chapter for more details.
IMPORTANT: When an ServSwitch CX Quad IP is accessible from the public
Internet or dial up connection, you must ensure that sufficient
are employed.
To connect the IP network port for global users
1 Depending upon where in the network the ServSwitch CX Quad IP is being
connected, run a category 5, 5e or 6 link cable from the appropriate hub or
router to the ServSwitch CX Quad IP unit.
2 Connect the plug of the link cable into the IP port on the front panel of the
ServSwitch CX Quad IP unit.
3 Configure the network settings as appropriate to the position of the
ServSwitch CX Quad IP within the network - see
for
details.
GLOBAL
USERS
®
724-746-5500
®
IP
Category , e or cable
from LAN / network switch
ServSwitch CX Quad IP
front panel
