Black Box ServSwitch 4site II User Manual Download Page 41 | Manualshive

Page: 41 / 88

Black Box ServSwitch 4site II User Manual Download Page 41

41

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 5: ON-SCREEN DISPLAY (OSD)

CROSS CHANNEL SWITCHING

With the feature “cross channel switching” enabled, the mouse can be moved outside the borders of the active channel. A device mouse
cursor is displayed and an inactive channel can be activated by a left click into the channel window.
The following table lists some points to be considered, when “cross channel switching” is activated or deactivated:

CROSS-CHANNEL SWITCHING

CROSS-CHANNEL SWITCHING

DEACTIVATED

ACTIVATED

Features

• the mouse always stays inside the active

channel window

• changing the active channel by mouse is only

possible via Hotmouse

• on the mouse leaving the active channel window, a yellow

device cursor is displayed

• when the device cursor is positioned over an inactive channel

window, this channel can be activated with a left mouse click

Used USB interfaces

• mouse relative

• If available “mouse absolute“ otherwise “mouse relative“

multiple monitors connected

to a computer

• every monitor is reachable by mouse

• only the monitor connected to the 4Site II is reachable by mouse
• recommended only for hosts supporting the interface “mouse

absolute”

«
...
39
40
41
42
43
...
»

Summary of Contents for ServSwitch 4site II

























































































Reviews:

No comments