Black Box ServSwitch 4site II User Manual Download Page 19 | Manualshive

Page: 19 / 88

Black Box ServSwitch 4site II User Manual Download Page 19

19

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 5: ON-SCREEN DISPLAY (OSD)

OSD - SYSTEM - HOTKEY

HOTKEY

Navigate with the arrow keys in the SYSTEM menu to the entry HOTKEY and press the ENTER/SELECT key to open the HOTKEY window.
Two different hotkey modes are available:

For multiple hotkey commands you can define one to four keys which are pressed simultaneously to enter the command mode.

Selectable keys are: STRG, SHIFT, ALT and WINDOWS.

For double-click hotkey commands you can choose one key, which is double-clicked to enter the command mode.

Selectable keys are: STRG, SHIFT, ALT and SCROLL.

To change the hotkey mode or select another hotkey, navigate with the TAB or ARROW UP/DOWN keys to the respective field and use the
ARROW LEFT/RIGHT or the +/- keys to change the setting.

Multiple

keys

The command mode is indicated by an LED flashing on the console keyboard.
Default setting: Multiple Hotkey: CTRL + ALT
NOTE: For a list of hotkeys to operate 4Site II, see Keyboard Commands in the Appendix of this manual.

«
...
17
18
19
20
21
...
»

Summary of Contents for ServSwitch 4site II

























































































Reviews:

No comments