Black Box RAS-PutIn, Installation And User Manual

Page: 63 / 93

5.5. ADMINISTRATION 51
After pressing the apply button these numbers will not be displayed again.
ˆ
Enable callback
This enables the callback mechanism. If you have callback entries configured (see below)
RAS-PutIn will reject any call from the configured number(s) and make a call to a number,
which can be configured too.
ˆ
Force callback
Only callback connections are enabled if you enable this option. That means nobody can
dial in without callback. This option has effect only if you have callbacks enabled.
ˆ
Calling #
This is the calling number - the client that tries to dial into RAS-PutIn.
ˆ
Called #
If you want to call the caller back, you have to enter his number here.
ˆ
User / Password
If RAS-PutIn calls back these are the user name and the corresponding password for
authentication on the console computer.
ˆ
Call back after [x] seconds
The entry is marked as a callback entry in case this checkbox is checked. Additionally, the
delay, after which the callback connection will be established, can be configured. Callback
entries are only effective when the callback mechanism is enabled.
Figure 5.24: RAS-PutIn ISDN settings panel
In the following, we will present some example use cases for a proper ISDN configuration.