Black Box Power View PS570A, Installation And Operation Manual, Page: 26 / 32

Setting the FTP Password
The FTP Password command sets the password as required by the FTP Host.
To set the FTP password:
At the Power View Enhanced PDU: prompt, type set ftp password , followed by the FTP password and
press Enter .
Example
The following command sets the FTP password to OpenSesame:
Power View Enhanced PDU: set ftp password OpenSesame<Enter>
Setting the filename to be uploaded
The FTP Filename command sets the filename of the firmware file to be uploaded.
To set the FTP filename:
At the Power View Enhanced PDU: prompt, type set ftp filename , followed by the firmware filename
and press Enter .
Example
The following command sets the FTP filename to pv-v51a.bin:
Power View Enhanced PDU: set ftp filename pv-v51a.bin<Enter>
Setting the filepath for the file to be uploaded
The FTP Filepath command sets the filepath for the firmware file to be uploaded.
To set the FTP filepath:
At the Power View Enhanced PDU: prompt, type set ftp filepath , followed by the filepath and press Enter .
Example
The following command sets the FTP filepath to ftp://Powerview:
Power View Enhanced PDU: set ftp filepath ftp://Powerview<Enter>
Displaying FTP configuration information
The Show FTP command displays all FTP configuration information.
•
FTP Host IP address
•
FTP Host username and password
•
Firmware filepath and filename
To display FTP configuration information:
At the Power View Enhanced PDU: prompt, type show ftp and press Enter .
Example
The following command displays the FTP configuration information:
Power View Enhanced PDU: show ftp<Enter>
FTP Configuration
Host IP Address: 12.34.56.99
Username: guest
Password: OpenSesame
Directory: ftp://powerview
Filename: pv-v51a.bin
22
•
Operations Power View Enhanced PDU
Installation and Operations Manual