Black Box Power View PS570A, Installation And Operation Manual, Page: 24 / 32

Telnet Administration Commands
Enabling and disabling Telnet support
The Set Telnet command is used to enable or disable Telnet support.
To enable or disable Telnet support:
At the Power View Enhanced PDU: prompt, type set telnet , followed by enabled or disabled and press Enter .
Changing the Telnet port
With Telnet support enabled, the Telnet server watches and responds to requests on the default Telnet port
number 23. This port number may be changed using the Set Telnet Port command.
To change the Telnet socket:
At the Power View Enhanced PDU: prompt, type set telnet port , followed by the port number and press Enter .
Example
The following changes the Telnet port number to 7001:
Power View Enhanced PDU: set telnet port 7001<Enter>
HTTP Administration Commands
Changing the HTTP server port
With HTTP support enabled, the HTTP server watches and responds to requests on the default HTTP port
number 80. This port number may be changed using the Set HTTP Port command.
To change the HTTP port:
At the Power View Enhanced PDU: prompt, type set http port , followed by the port number and press Enter .
Example
The following changes the HTTP port number to 2048:
Power View Enhanced PDU: set HTTP port 2048<Enter>
Setting the HTTP authentication method
The Set HTTP Security command is used to set the method of authentication. The Power View Enhanced
PDU HTTP server supports two authentication methods for security and validation of the username-
password – Basic and MD5 digest.
For more information on authentication methods, see Changing the Telnet or HTTP server port number:
In the appropriate Port field, enter the port number and press Apply.
Setting the HTTP authentication method: on page 13.
To set the HTTP authentication method:
At the Power View Enhanced PDU: prompt, type set http security , followed by basic or md5 and press Enter .
20
•
Operations Power View Enhanced PDU
Installation and Operations Manual