16
Setting the Phone Book Mode
There are two possible modes for the videophone.
• Master
• Slave
The videophone is supplied in
Slave
mode by default. If you have multiple units
within a LAN, you need to configure 1 unit in your network to be a
Master
unit. The
Master unit can then be configured with entries in the Phone Book. See “Setting up
the Phone Book” on page 14.
The Slave units within the same network can then be updated with Phone Book
entries contained in the Master unit. In this way, multiple Slave units on your LAN
can easily be updated with the Phone Book from a single Master unit.
To set the Mode of your videophone to Master:
1.
Press the
menu
button, then press the number
1
key to display the Phone
Book options.
2.
Press the number
2
key to highlight the
Mode
field.
3.
Use the Right or Left arrow keys to select
Master
.
Press the
enter
button twice to save the changes
Updating Slave Units with Master Phone Book
To update a Slave unit with the Master Phone Book entries:
Summary of Contents for mm146
