4
SYNC/ASYNC FIBER OPTIC MODEM
TELECOMMUNICATION SAFETY
The safety status of each of the ports on the Sync/Async Fiber Optic Modem is
declared according to EN 41003 and is detailed in the table below:
Safety Status
Ports
SELV*
RS-530
*SELV=Safety Extra-Low Voltage
LASER WARNINGS
This product may be equipped with a laser diode. The laser warning symbol will be
attached near the optical transmitter. Please observe the following precautions:
• Do not attempt to adjust the laser drive current.
• Do not use broken or unterminated fiber optic cables/connectors or stare at
the laser beam.
• The use of optical equipment with this product will increase eye hazard.
• Use of controls, adjustments, or performing procedures other than those
specified herein, may result in hazardous radiation exposure.
