background image

 

Terms to transport 

 
The equipment of the Black Box DSL family should be packed and transported by: 

• 

motor transport with an enclosed truck body; 

• 

enclosed railroad cars; 

• 

unpressurized airplanes and helicopters (up to 10000 m at an air pressure of  
170 Torr); 

• 

river transport (in holds). 

The equipment of the Black Box DSL family should withstand transportation when being packed under the 
following conditions: 

• 

temperature from -50

о

 

С

 to +50

о

 

С

• 

relative air humidity up to 100% at 25

о

 

С

 (within 10 days). 

 
 
 
 

The equipment of the Black Box DSL family should be packed and withstand transportation by: 

• 

motor transport with the number of transshipments no more than four: 

• 

along the asphalt-concrete and cement-concrete roads at a distance 
of 200 – 1000 km; 

• 

earth roads at a distance of 50 – 250 km at a speed of 40 km/hour; 

• 

different means of transport (airplanes, railway transport in combination with motor transport along the 
asphalt-concrete and cement-concrete roads at a distance of 200 km) with the number of 
transshipments from three to four; 

• 

water transport (excluding sea transport) in combination with motor transport along the asphalt-
concrete and cement-concrete roads at a distance of 200 km with the number of transshipments no 
more than four. 

During transportation the packages with the equipment should be fixed so that to exclude their moving, 
collision and collision against the transport bodies. 

Date 21.10.03 

page 28 of 29 

 

Summary of Contents for MDS931AE-2






























Reviews: