Black Box LGB708A-R4 User Manual Download Page 18

Page: 18 / 40

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 5: WEB MANAGEMENT

5.2.3 CONFIGURATION — VLANS

FIGURE 5-5. ADD A VLAN

VLAN stands for Virtual LAN, which is a logical network grouping that limits the broadcast domain and allows you to isolate network
traffic so that only the members of the same VLAN group can communicate with each other.

VLAN ID: ID of configured VLAN (1–4094, no leading zeroes). Type the new ID and click Add. The web UI is directed to the VLAN Setup

screen.

Add: After inputting the VLAN ID, press this button to add a new VLAN with the VLAN ID you inputted.

FIGURE 5-6. VLAN SETUP SCREEN

Member: Check the checkbox of the port that you would like to add to the VLAN. Press the Apply button to save the settings you’ve made.

FIGURE 5-7. VLAN CONFIGURATION LIST SCREEN

VLAN Configuration List: Lists all the current VLAN groups created for this system. Up to 16 VLAN groups can be defined. VLAN 1

is the default untagged VLAN.

Summary of Contents for LGB708A-R4








































Search results

Summary of Contents for LGB708A-R4

Reviews:

Black Box LGB708A-R4, User Manual, Page: 18 / 40

Search results

Summary of Contents for LGB708A-R4

Reviews: