manualshive.com logo in svg

Black Box LES1516A, User Manual

Share
Download
Black Box LES1516A User Manual Download Page 278

278

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 15: CONFIGURATION FROM THE COMMAND LINE

Supported values for settings that are not fixed or user-created are as follows:

TABLE 15-15. SUPPORTED VALUES  

 SETTING

SUPPORTED VALUE

  Authentication type

None, PAP, CHAP, and MSCHAPv2.

  Serial port baud rate

9600, 19200, 38400, 57600, 115200, and 230400

  Parity values

None, Odd, Even, Mark, and Space

  Data bits values

5, 6, 7, and 8

  Stop-bit values

1, 1.5, and 2

  Serial port flow control

Hardware, Software, and None

If you do not wish to use out-of-band dial-in access the procedure for enabling start-up messages on the console port is 
documented in chapter 14.3.2.
The following command will synchronize the live system with the new configuration:
 

# config –a

15.1.19 DHCP SERVER 

To enable the DHCP server on the console management LAN with the following settings:

TABLE 15-16. DHCP SERVER SETTINGS  

 DHCP SERVER SETTING

VALUE

  Default lease time

200000 seconds.

  Maximum lease time

300000 seconds

  DNS server 1

192.168.2.3

  DNS server 2

192.168.2.4

  Domain name

company.com

  Default gateway

192.168.0.1

  IP pool 1 start address

192.168.0.20

  IP pool 1 end address

192.168.0.100

  Reserved IP address

192.168.0.50

  MAC to reserve IP for

00:1e:67:82:72:d9

  Name to identify this host

John-PC

Summary of Contents for LES1516A





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands