Black Box LEP0002A Manual Download Page 82 | Manualshive

Page: 82 / 129

Black Box LEP0002A Manual Download Page 82

79

CHAPTER 8: Configuration Utility

Table 8-4 (continued). System configuration parameters.

Parameter

Description

Wireless Function

Select Enable or Disable to manually enable or

disable the wireless function. Or select Auto for

the print server to select this option

automatically.

Auto

Select Auto to let the print server automatically

decide to enable or disable the wireless function.

Enable

If you manually enable the wireless function, the

print server’s wireless LAN will be always

enabled, and Ethernet will be always disabled.

Disable

If you manually disable the wireless function, the

print server’s wireless LAN will be always

disabled, and Ethernet will be always enabled.

OK button

Click on this button to save your changes.

Cancel

Click on this button to cancel your changes.

The print server can work in only Ethernet or wireless LAN mode, but it can’t work
in both at the same time. When the print server starts up, it will autodetect if the
LAN port is connected to an active network by an Ethernet cable.

If the print server is connected to an active network by an Ethernet cable when
starting up, the print server will run in Ethernet mode. If the print server is not
connected to an active network by Ethernet cable when starting up, the print
server will run in wireless LAN mode. The print server default is in Auto mode.

«
...
80
81
82
83
84
...
»

Summary of Contents for LEP0002A


































































































































Reviews:

No comments