46
PURE NETWORKING WIRELESS USB 10/100 PRINT SERVERS
Figure 4-27. Configuring the print server port.
6. To configure the port to a local printer port, simply click on
Next
. To go back
to the previous screen, click on the
Back
button. Click on
Cancel
to cancel
your changes.
To connect the print server to a network port, highlight the print server’s
network port that was created during the client installation process (see the
Available Ports list in Figure 4-27). Then click on
Configure Port
. A protocol
selection screen appears (not shown in this manual). Select the printer port’s
protocol (either Auto, TCP/IP, IPX, or NetBEUI) and click
OK
. The screen
shown in Figure 4-27 will reappear. Click on
Cancel
to cancel your changes,
or click on
Next
to go to the next screen.
7. You’ll be asked to answer some additional questions in order to finish the
printer setup.
4.3 Client Utilities
After the client installation is complete, there will be three tools in the print
server’s program folder:
• Network ports quick setup