manualshive.com logo in svg

Black Box LEP0002A, Manual, Page: 127 / 129

Share
Download
Black Box LEP0002A Manual Download Page 127

124

PURE NETWORKING WIRELESS USB 10/100 PRINT SERVERS

10. IPP Printing

IPP (Internet Printing Protocol) printing provides convenient remote TCP/IP
printing. The print server supports IPP printing by default. It is needless to do any
configuring. Any PC that can support IPP printing (for example Windows
2000/XP) can directly use the print server via IP. By using the IPP printing, you
can share the printer with all the PCs that can access the print server via IP. You
can even share your printer with Internet users.

On the print server side, no setting is required. Make sure the print server has
correct IP settings. If you want to share the printers with Internet users, you have to
set a real IP to the print server. You also have to make sure that any gateway, router
or firewall does not block IPP protocol if you have these gateway devices installed
in your network.

You only need to perform the Windows standard Add New Printer procedure (see
page 31), select a network printer, or a printer attached to another computer
(shown in Figure 10-1) and click on 

Next

. 

Figure 10-1. Add Printer Wizard screen.

Summary of Contents for LEP0002A


































































































































Reviews:

No comments