manualshive.com logo in svg

Black Box LEP0002A, Manual, Page: 122 / 129

Share
Download
Black Box LEP0002A Manual Download Page 122

119

9.3.5 A

PPLE

T

ALK

AppleTalk is a data communication protocol often used by Macintosh computers.
The print server can use these parameters to join the AppleTalk network and share
the printer with other AppleTalk workstations. You must set up the zone name and
printer type for each of the print server’s printer ports. See Figure 9-13.

Figure 9-13. AppleTalk screen.

Table 9-7 describes the AppleTalk options.

Table 9-7. AppleTalk parameters.

Parameter

Description

AppleTalk Zone Name

The print server must join AppleTalk zones before it

can be shared with other workstations. Only work-

stations in the same zone can share the printer. If

you want to share the printer with all workstations in

all zones, enter an asterisk (*) in the Zone Name field.

Printer Type

This specifies the printer type attached to each

printer port. You can get the printer type from the

printer’s manufacturer.

CHAPTER 9: Web Management

Summary of Contents for LEP0002A


































































































































Reviews:

No comments