Black Box LE2700A, User Manual, Page: 85 / 154

724-746-5500 | blackbox.com
Page 85
Chapter 5: Management
Table 5-53. IGMP Snooping Configuration screen options.
Label Description
Snooping Enabled Check to enable global IGMP snooping.
Unregistered
IPMCv4Flooding
enabled Check to enable unregistered IPMC traffic flooding.
Router Port Specifies which ports act as router ports. A router port is a port on the Ethernet switch that leads
towards the Layer 3 multicast device or IGMP querier.
If an aggregation member port is selected as a router port, the whole aggregation will act as a router
port.
Fast Leave Check to enable fast leave on the port.
5.7.2 VLAN Configurations of IGMP Snooping
Each page shows up to 99 entries from the VLAN table, with a default value of 20, selected by the Entries Per Page input field.
When first visited, the web page will show the first 20 entries from the beginning of the VLAN Table. The first displayed will be
the one with the lowest VLAN ID found in the VLAN Table.
The VLAN input field allows the user to select the starting point in the VLAN Table. Clicking the Refresh button will update the
displayed table starting from that or the next closest VLAN Table match.
The >> will use the last entry of the currently displayed entry as a basis for the next lookup. When the end is reached, the text No
more entries is shown in the displayed table. Use the |<< button to start over.
Figure 5-74. IGMP Snooping VLAN Configuration screen.