Black Box LE2700A, User Manual, Page: 76 / 154

724-746-5500 | blackbox.com
Page 76
Chapter 5: Management
5.6.7 QoS Egress Port Scheduler and Shapers
This page allows you to configure Scheduler and Shapers for a specific port.
Strict Priority
Figure 5-63. Strict Priority screen.
Table 5-43. Strict Priority screen options.
Label Description
Scheduler Mode Controls whether the scheduler mode is Strict Priority or Weighted on this switch port.
Queue Shaper Enable Check to enable queue shaper for individual switch ports.
Queue Shaper Rate Configures the rate of each queue shaper. The default value is 500. This value is restricted to 100 to
1000000 when the Unit is kbps, and it is restricted to 1 to 3300 when the Unit is Mbps.
Queues Shaper Unit Configures the rate for each queue shaper. The default value is 500. This value is restricted to 100 to
1000000 when the Unit is kbps, and it is restricted to 1 to 3300 when the Unit is Mbps.
Queue Shaper Excess Allows the queue to use excess bandwidth.
Port Shaper Enable Check to enable port shaper for individual switch ports.
Port Shaper Rate Configures the rate of each port shaper. The default value is 500 This value is restricted to 100 to
1000000 when the Unit is kbps, and it is restricted to 1 to 3300 when the Unit is Mbps.
Port Shaper Unit Configures the unit of measurement for each port shaper rate as kbps or Mbps. The default value is
kbps.