Black Box LE2700A, User Manual, Page: 50 / 154

724-746-5500 | blackbox.com
Page 50
Chapter 5: Management
Table 5-19. LACP Port Configuration screen options.
Label Description
Port Indicates the ID of each aggregation group. Normal indicates there is no aggregation. Only one group ID is
valid per port.
LACP Enabled Lists each switch port for each group ID. Check to include a port in an aggregation, or clear the box to
remove the port from the aggregation. By default, no ports belong to any aggregation group. Only full
duplex ports can join an aggregation and the ports must be in the same speed in each group.
Key The Key value varies with the port, ranging from 1 to 65535. Auto will set the key according to the physi-
cal link speed (10Mb = 1, 100Mb = 2, 1Gb = 3). Specific allows you to enter a user-defined value. Ports
with the same key value can join in the same aggregation group, while ports with different keys cannot.
Role Indicates LACP activity status. Active will transmit LACP packets every second, while Passive will wait for a
LACP packet from a partner (speak if spoken to).
Save Click to save changes.
Reset Click to undo any changes made locally and revert to previously saved values.
LACP System Status
This page provides a status overview for all LACP instances.
Figure 5-27. LACP System Status screen.
Table 5-20. LACP System Status screen options.
Label Description
Aggr ID The aggregation ID is associated with the aggregation instance. For LLAG, the ID is shown as 'isid:aggr-id'
and for GLAGs as “aggr-id.”
Partner System ID System ID (MAC address) of the aggregation partner
Partner Key The key assigned by the partner to the aggregation ID
Last Changed The time since this aggregation changed.
Local Ports Indicates which ports belong to the aggregation of the switch/stack. The format is: “Switch ID:Port.”
Refresh Click to refresh the page immediately
Auto-refresh Check to enable an automatic refresh of the page at regular intervals
LACP Status
This page provides an overview of the LACP status for all ports.