Black Box LE2700A, User Manual, Page: 130 / 154

724-746-5500 | blackbox.com
Page 130
Chapter 5: Management
5.12 Troubleshooting
5.12.1 Factory Defaults
You can reset the configuration of the stack switch on this page. Only the IP configuration is retained.
Figure 5-123. Factory default prompt screen.
Table 5-98. Factory default prompt screen options.
Label Description
Yes Click to reset the configuration to factory defaults.
No Click to return to the Port State page without resetting.
5.12.2 System Reboot
You can reset the stack switch on this page. After reset, the system will boot normally as if you have powered on the devices.
Figure 5-124. Warm Reset screen.
Table 5-99. Factory default prompt screen options.
Label Description
Yes Click to reboot device.
No Click to return to the Port State page without rebooting.
5.13 Command Line Interface Management
Besides Web-based management, the switch also supports CLI management. You can use console or telnet to manage the switch
by CLI.
CLI Management by RS-232 Serial Console (115200, 8, none, 1, none)
Before configuring RS-232 serial console, connect the RS-232 port of the switch to your PC Com port using a RJ45 to DB9-F
cable.