Black Box LE2700A, User Manual, Page: 100 / 154

724-746-5500 | blackbox.com
Page 100
Chapter 5: Management
Table 5-71. ICMP Parameters screen options.
Label Description
ICMP Type Filter Specifies the ICMP filter for the ACE
Any: no ICMP filter is specified (ICMP filter status is "don't-care").
Specific: if you want to filter a specific ICMP filter with the ACE, you can enter a specific ICMP value. A field
for entering an ICMP value appears.
ICMP Type Value When Specific is selected for the ICMP filter, you can enter a specific ICMP value. The allowed range is 0 to
255. A frame matching the ACE will use this ICMP value.
ICMP Code Filter Specifies the ICMP code filter for the ACE
Any: no ICMP code filter is specified (ICMP code filter status is "don't-care").
Specific: if you want to filter a specific ICMP code filter with the ACE, you can enter a specific ICMP code
value. A field for entering an ICMP code value appears.
ICMP Code Value When Specific is selected for the ICMP code filter, you can enter a specific ICMP code value. The allowed
range is 0 to 255. A frame matching the ACE will use this ICMP code value.
Figure 5-92. TCP Parameters and UDP Parameters screens.
Table 5-72. TCP Parameters and UDP Parameters screens options.
Label Description
TCP/UDP Source
Filter Specifies the TCP/UDP source filter for the ACE
Any: no TCP/UDP source filter is specified (TCP/UDP source filter status is "don't-care").
Specific: if you want to filter a specific TCP/UDP source filter with the ACE, you can enter a specific TCP/UDP
source value. A field for entering a TCP/UDP source value appears.
Range: if you want to filter a specific TCP/UDP source range filter with the ACE, you can enter a specific
TCP/UDP source range. A field for entering a TCP/UDP source value appears.
TCP/UDP Source
No. When Specific is selected for the TCP/UDP source filter, you can enter a specific TCP/UDP source value. The
allowed range is 0 to 65535. A frame matching the ACE will use this TCP/UDP source value.
TCP/UDP Source
Range When Range is selected for the TCP/UDP source filter, you can enter a specific TCP/UDP source range value.
The allowed range is 0 to 65535. A frame matching the ACE will use this TCP/UDP source value.