Black Box KVS4-1002VM, User Manual, Page: 12 / 15

12
USER GUIDE
LED’s BEHAVIOR
User Console Interface – Display LED:
User Console Interface – CAC LED:
Front Panel – Port Selection LED’s:
Front Panel – CAC Selection LED’s:
Front Panel - Port and CAC Selection LED’s:
# Status Description
1 Off Monitor is not connected
2 On Monitor is connected
3 Flashing EDID problem – Learn EDID to fix the problem
# Status Description
1 Off CAC is not connected
2 On Authorized and functional CAC is connected
3 Flashing Non-CAC peripheral is connected
# Status Description
1 Off Non-selected port
2 On Selected port
3 Flashing EDID learn in process
# Status Description
1 Off CAC port is disabled or non-selected port
2 On CAC port is enabled
3 Flashing EDID learn in process
# Status Description
1 All Flashing
Connected peripheral to keyboard or mouse
console ports is rejected
IMPORTANT!
If all the Front Panel LED’s are flashing and the
buzzer is beeping, the Secure KVM Switch has
been TAMPERED with and all functions are
permanently disabled. Please contact Black Box
technical support at info@blackbox.com
If all Front Panel LED’s are on and not flashing,
the POWER UP SELF TEST has failed and all
functions are disabled. Check if any of the front
panel port selection buttons are jammed. In this
case, release the jammed button and recycle the
power. If power up self test is still failing, please
contact Black Box technical support
at
info@blackbox.com
EDID Learn - Front Panel LED’s:
All LED’s are turned on for 1 second. Then:
• Port 1 LED’s will flash until the end of the process.
• Port 2 LED’s will flash until the end of the process if a second video board exists (Dual-head Secure KVM Switch)
• Port 3 LED’s will flash until the end of the process if a third video board exists (Quad-head Secure KVM Switch)
• Port 4 LED’s will flash until the end of the process if a fourth video board exists (Quad-head Secure KVM Switch)