manualshive.com logo in svg

Black Box KV101A, Manual, Page: 61 / 77

Share
Download
Black Box KV101A Manual Download Page 61

SERVSWITCH™ CONSOLE  PLUS  

 

60

 

Safety and EMC Regulatory Statements 

Safety Information 

 
Documentation reference symbol. If the product is marked 

with this symbol, refer to the product documentation to get 
more information about the product. 
 

WARNING

        A WARNING in the manual denotes a hazard that can cause 

injury or death. 

 

CAUTION 

 

A CAUTION in the manual denotes a hazard that  

can damage equipment. 

 

Do not proceed beyond a WARNING or CAUTION notice until you have 
understood the hazardous conditions and have taken appropriate steps. 
 

Grounding 

These are Safety Class I products and have protective earthing terminals. 
There must be an un-interruptible safety earth ground from the main power 
source to the product’s input wiring terminals, power cord, or supplied power 
cord set. Whenever it is likely that the protection has been impaired, 
disconnect the power cord until the ground has been restored. 

 
Servicing  

There are no user-serviceable parts inside these products. Only service-trained 
personnel must perform any servicing, maintenance, or repair.  
The user may adjust only items mentioned in this manual. 
 
 

 

 
 
 
 
 

 
 
 
 
 
 
 
 

Summary of Contents for KV101A














































































Reviews:

No comments