Black Box KV101A Manual Download Page 49 | Manualshive

Page: 49 / 77

Black Box KV101A Manual Download Page 49

SERVSWITCH™ CONSOLE PLUS

48

Command

Key Sequence

Description

Send Null Byte [Ctrl] N

Sends a null byte to the CPU’s PS/2
mouse port. Use this command if
the PS/2 mouse gets “out of sync”.

Reset Mouse
(NT or Unix
systems only)

[Ctrl] O (not zero)

Resets the currently selected NT or
Unix computers PS/2 mouse. Also
switches the NT mouse driver to
“wheel” mode.

Start Scan

[Ctrl] S

Sequentially steps through all

connected CPUs in a group.

Stop Scan

[Ctrl] X

Turns scan “Off”

Table 1. Keyboard commands

When you first start using a KVM station, it may require you to login. If the
KVM station requires a login, the login box, shown in Figure 15, will display.
The login box appears when a Unit is powered on, when a user logs off, or
when a preset time interval passes with no keyboard or mouse activity. If a
login is required, type in your User ID and press [Enter]. (User ID is the user
name defined on the configure user menu) If the user ID is validated, you can
then type in your password and press [Enter]. If the password is validated, the
KVM station can be accessed. A user may login with the same user ID and
password at more than one KVM station. Both the User ID and password are
case sensitive.

Figure 15. Login screen

Once you have access to a KVM station, you can switch to any of the connected
computers provided your security profile allows access to that computer. To
connect to a computer, you can use the “Direct CPU Connect” keyboard
command or the “Computer select” menu. (See Table 1) To access the
“Computer select” menu, press and release the left [Ctrl] key, then press the
[Esc] key. The computer select menu shown in Figure 16 will display. Use the
up/down arrow keys and the page up/page down keys and select the computer
to switch to and press [Enter]. You will be immediately connected to that
computer and a connection status messages will display providing information
about the connection between the KVM station and the computer. Pressing the
F1 key will sort the list, F2 key will display the status screen.

Login Control Room

User ID

Password

«
...
47
48
49
50
51
...
»

Summary of Contents for KV101A














































































Reviews:

No comments