Black Box KV101A, Manual, Page: 32 / 77

OPERATION
31
Starting computer number
(Default: 1)
The “Starting computer number” defines to the system, the first CPU port
number for a particular ServSwitch Console Plus switch that is configured in an
expanded topology. (See page 15)
Switch #1’s starting computer number is always 1.
Switch #2’s number is the total CPU ports on Unit #1 plus 1.
Switch #3’s number is the total CPU ports on Unit #1 and Unit #2 plus 1, and
so forth.
To enter the “Starting computer” number use the up/down arrow keys and
select “Starting computer number” and press [Enter]. An input box will display
for a new starting computer number. Enter the new “Starting computer”
number and press [Enter].
Maximum computers (Default: 64)
The “Maximum computers” value is calculated by counting the number of CPU
ports on all switches. This value must be entered from KVM station #1 before
all Units are connected in an expansion topology. When saved, this value is
propagated to all connected Units. To enter the “Maximum computers” value,
select it and press [Enter]. An input box will display to enter the maximum
computers value. Type in the new value and press [Enter].
“Keyboard settings ”
selections.
PC keyboard rate (chars/sec) (Default: 20)
This option adjusts the KVM keyboard action when you hold down a key to
repeat a single character. Valid inputs are 1-31.
PC keyboard delay (Default: Fast )
This option adjusts the delay between when a key is pressed and held and when
it begins to send repeated characters to the selected computer.
The options are:
n
Slow
n
Medium
n
Fast
n
Fastest