manualshive.com logo in svg

Black Box KV101A, Manual, Page: 28 / 77

Share
Download
Black Box KV101A Manual Download Page 28

INSTALLATION 

 

27

 

 

 

10.

 

Switch the KVM station to the next sequential CPU port as explained in 
step 6 and perform steps 7 – 9 for this computer and for the remaining 
computers. 

11.

 

Connect other KVM stations as needed to the ServSwitch Console Plus 
switch and verify they operate properly. (See appendix F) 

 
This completes the basic installation of a “RING” configuration. 
A KVM station connected to any ServSwitch Console Plus switch can connect to 
any computer in the “RING”.  Other configuration parameters can be set-up 
for the system, computers, KVM stations, users, profiles, groups, and 
languages.  See the “Configuration menu” section for instructions on setting up 
these items.  
 
These installation steps are a guideline for installing multiple switches in a 

“RING” topology.  Following these steps verify, that through the installation 
process, everything functions properly.  
 
Please refer to the Operations section for using the ServSwitch Console Plus 
switch. 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for KV101A














































































Reviews:

No comments