SERVSWITCH™ CONSOLE PLUS
22
f.
Select “Save” and press [Enter]. A “YES/NO” choice box will display.
Select “YES” and press [Enter] to save the changes.
g.
Turn the power off on the ServSwitch Console Plus.
h.
Connect the KVM station to the KVM connector on Unit #3.
i.
Configure this Units “Starting computer” number and then all other
Units in the system. When the “Starting computer” number has been
entered for all Units, proceed to step 3.
3.
Connect the KVM station to Unit #1’s KVM connector and apply power to
the monitor and Unit #1.
4.
Enter the “Maximum computers” number
a.
Display the main menu (left control [Ctrl] key, then the F12 key.)
b.
Select “System” and press [Enter].
c.
Select “Maximum computers” and press [Enter]. An input box will
display for a new “Maximum computers” number. Enter the correct
“Maximum computers” value as explained on page 15 and press
[Enter].
d.
Press the “Esc” key to return to the “Main menu”, select “Save” and
press [Enter]. A “YES/NO” choice box will display. Select “YES” and
press [Enter] to save the change.
5.
The next item is to connect the Units in a “BUS” configuration and verify
that communication between the Units is established. To do this, call up
the System status display by pressing and releasing the left control [Ctrl]
key, then the F12 key.
6.
Select “Status” from the Main menu and press [Enter]. The system status
screen will display showing the following: (Figure 13)
a.
Computers
b.
Power (Power on status)
c.
POS (Card position)
d.
VER (Program version)
e.
KVM
f.
CPU
g.
User
h.
Status
The number of system CPU ports that Unit #1 has will be highlighted. If
the Unit is a 16-port switch, computers 1–4, 5–8,
9–12, and 13–16 will be highlighted on the status screen.
7.
Apply power to the next unit to bus in, then connect an expansion cable
(IN THIS ORDER);
From:
Unit #2’s “OUT” expansion card connector
To:
Unit #1’s “IN” expansion card connector.
(Connecting the expansion cable from the “IN” connector first to the
“OUT” connector can cause termination conflicts and require power to be
cycled on all units.
Summary of Contents for KV101A
Page 1: ......
Page 76: ...APPENDICES 75 Appendix K Rack mount illustration ...
Page 77: ...SERVSWITCH CONSOLE PLUS 76 ...