3
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1.877.877.2269
BLACKBOX.COM
CHAPTER 1: OVERVIEW
1.1 INTRODUCTION
The Fiber Wall Cabinet is used to extend indoor fiber optic distribution cable runs out from the data center to a remote wallmount area in
your building. The fiber wall mount enclosure allows the incoming bulk fiber optic distribution cable to break out and terminate to fiber
adapters panels in the enclosure where the user can use fiber duplex cable to connect to your equipment.
The fiber optic lock style wall cabinet, is perfect for secured fiber cabling. The lock-style cabinet has two locking compartments. One
compartment is for a user side and the other is for the technician side. Each compartment uses a separate key lock for additional
security. This enclosure can accept up to four fiber adapter panels.
The cabinet’s rugged metallic housing is made of heavy-gauge steel with a powder coat finish. Bulk fiber cabling can enter the enclosure
from the top left or bottom left grommet opening. The rubber grommet is a thin membrane seal that prevents dust from settling inside.
In addition, the enclosure can accommodate an internal splice tray for fusion or mechanical splicing.
1.2 WHAT’S INCLUDED
Your package should include the following items. If anything is missing or damaged, please contact Black Box at 877-877-2269
or [email protected].
(1) Fiber Wall Cabinet, Lock Style, 4-Adapter Panel
(1) Warning label
(6) 1” (2.5-cm) stick-on rectangular cable holders
(4) Mounting screws
(30) 3” (7.6-cm) cable ties
(4) 4” (10.2-cm) cable ties
(1) cable management sticker
(1) set of ID labels (1, 2, 3, 4)
(2) sets of keys (labeled “A” and “B”)
(2) semicircular cable holding rings (installed)
