manualshive.com logo in svg

Black Box iPATH ACR1000A-CTL-192, User Manual, Page: 96 / 101

Share
Download
Black Box iPATH ACR1000A-CTL-192 User Manual Download Page 96

96

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

APPENDIX G - DHCP SERVER REQUIREMENTS

Version 1.0

G.1 AGILITY DHCP CLIENT

The Agility DHCP client will identify itself to a DHCP server using DHCP option 60 (Vendor-Class-Identifier) containing the brand 
string appropriate to the firmware.
The Agility DHCP client will also provide the DHCP server with its unique hostname and a request for DHCP option 125 (Vendor 
Identified Vendor Sub Options). See 

Using DHCP option 125

 for details.

G.2 DHCP SERVER

A DHCP server will use the Vendor-Class-Identifier to identify an Agility and supply it with vendor information encapsulated in the 
Enterprise number (25119) within DHCP option 125 (Vendor Identified Vendor Sub Options).
As of Agility firmware version 4.2, the required vendor information to be encapsulated is:
Sub-option 1: Array of IP addresses of all iPATH servers in the cluster.

Note: Agility will ignore any DHCP OFFER not containing this information.

Example Gamma (Cisco IOS DHCPd, Black Box, iPATH servers: 10.0.20.5, 10.0.20.6)

ip dhcp pool vlan20
  network 10.0.20.0 255.255.255.0
  default-router 10.0.20.1
  option 60 ascii “black box”
  option 125 hex 0000.621f.0a01.080a.0014.050a.0014.06

where:
  0x0000621f    

Enterprise number (25119)

  0x0a    

 

Length

  0x01    

 

Sub-option 1

  0x08    

 

Length

  0x0a001405    

10.0.20.5 (Primary iPATH)

  0x0a001406    

10.0.20.6 (Backup iPATH)

Summary of Contents for iPATH ACR1000A-CTL-192






































































































Reviews:

No comments