Black Box iPATH ACR1000A-CTL-192 User Manual Download Page 60

Page: 60 / 101

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 5: OPERATION

For non-admin users, the On-Screen Display provides a clear way to choose and access multiple channels.

5.1 LOGGING IN

1 On the keyboard connected to your Agility remote, press the hotkey combination

Ctrl-Alt-C

to display the On-Screen Display or

OSD (this hotkey combination can be altered on the Dashboard > Settings > Remotes page).

You will either see the list of channels for which you have permission or be presented with the following login:

2 Enter your Username and Password and click the Login button to display the

Local OSD screen

Once logged in, you will remain logged in until either you click the Logout link in the top right of the OSD; or there is no activity

for two days or until the Agility unit is rebooted.

Summary of Contents for iPATH ACR1000A-CTL-192





































































































Search results

Summary of Contents for iPATH ACR1000A-CTL-192

Reviews:

Black Box iPATH ACR1000A-CTL-192, User Manual, Page: 60 / 101

Search results

Summary of Contents for iPATH ACR1000A-CTL-192

Reviews: