42
iCOMPEL Deployment Manager (IDM)
User Guide (V3.1.0)
Managing and Monitoring the Network
Lists the player's serial number and the
organization
to which it belongs.
Allows you to add, modify, or clear the player's name.
Configure whether or not the
IDM
accepts the player's reports.
organization
Name
Serial
Properties
To enable any changes, you must click the
button.
Displays the name of the
organization
to which the player belongs.
Displays the player's name (if configured). If you did not configure it with a name,
IDM
displays the
player's serial number.
Displays the player's serial number.
Indicates that the
IDM
accepts reports from the player. If not, this field is left blank.
Add Players:
To add a player, enter the following details and click the
button:
Serial Number
organization
Enter the player's serial number.
IDM
adds the player to the named
organization
.
Name
Accept Reports
Check the
Accept Reports from this Player
box for
IDM
to accept the player's reports.
2.3.4 Setting Up Alarms
Software
Hardware
Publisher
Subscriber
For each alarm, choose the radio button that describes the behaviour you want:
Ignore Alarm
–
IDM
ignores this alarm.
Observe Alarm
–
IDM
monitors the condition and raises an alarm according to the defined parameter.
If you wish to refer to the player by a meaningful name, enter it here. You can also name a player on
its
Detailed Status
page (see
20
for details).
59
Refer to
for background and reference information on all of the alarms.
Use the
Alarm Configuration
options to set up the default alarms for the
IDM
system, which will be used unless you
override them elsewhere. If required, you can override those defaults by using the
organization
>
Alarm Configuration
options (as described in
35
).
IDM
groups alarms into categories according to their applicability. Click the tab appropriate to the alarms you want to
set up:
