Black Box ICOMP, User Manual

Page: 44 / 92

Copyright (c) 2009 - 2012 Black Box Corporation
724-746-5500 | blackbox.com 44
iCompel Data Engine - User Guide (V3.1.2)
Select the action, and click the Configure button to view or modify the Connection.
To remove this action, select the action and click the Undo Add button.
Note that if this Connection was Added from a file, the original file will not be deleted.
Active Connection has been modified
There are modifications to the specified Connection. These modifications will be made to the Connection when the
Apply button is pressed.
To view the current modifications to the Active Connection, select the action on the Outstanding actions page, then
click the View button.
To view the currently Active Connection, select the Connection in the Active page. If there are modifications then the
original Active Connection will be marked as read only, and changes are only allowed to the modified version,
accessed through the Outstanding Actions page.
To revert (undo) changes, select the action and click the Undo button.
Active Connection will be removed
The specified currently Active Connection will be removed when Apply is pressed.
To reverse this action, select the action and click the Undo button.
3.4.3 View Status
When an Active Connection is not working as expected, detailed status messages can be viewed by selecting the
Active Connection from the Active page, then
View Status Messages... from either the right click context menu or
the Connection menu.
The following dialog is shown: