Black Box ICOMP, User Manual

Page: 38 / 92

Copyright (c) 2009 - 2012 Black Box Corporation
724-746-5500 | blackbox.com 38
iCompel Data Engine - User Guide (V3.1.2)
Additional licenses can be applied from the iCOMPEL
Setup - System Setup - Licensing
Web page. Further
information about applying licensing can be found in the iCOMPEL documentation.
2.5 Specifying when to execute
The iCompel Data Engine can execute queries on the following schedules:
One time, by using the Test Query button on the Test page within the Connection Editor.
At a specified time every day - a periodic query.
Every interval .
Use the Schedule page in the Connection Editor to describe when the Connection should be executed.
Note the Schedule is only applied when the Connection is made Active , and not when the Connection is tested in the
Connection Editor. Please refer to the Managing Active Connections section for more information.
2.6 Connection Properties
This page allows a user to specify an additional Name and optional Comment properties for this Connection.
These values will be displayed in the Service Manager application, and can be used to assist in identifying a
Connection.
The Name field is mandatory, but is automatically populated when the Connection is first saved.
2.7 Testing a Connection
The Test page allows the user to execute the current Connection.
Note that the Connection is executed once only each time the Test button is pressed .
The log message window shows execution and other status messages. Right click on the message window to copy
messages to the clipboard, or to clear the message window.