Black Box FOOBL Manual Download Page 8 | Manualshive

Page: 8 / 16

Black Box FOOBL Manual Download Page 8

Page 8

724-746-5500 | blackbox.com

Optical Break Locator

3. Powering the Unit

3.1 Batteries

When the battery power is almost out, a low-battery indicator LED will blink

continuously. Replace the batteries or plug in the AC adapter to charge batteries.

Make sure that you turned the unit on before charging the batteries. Unplug the

AC adapter when the batteries are fully charged.

If the unit will not be used for a long time, remove the batteries to prevent acid

from leaking.

3.2 AC Operation

If you will use the unit mainly at one location, for example, in a laboratory or test

department, use the AC adapter to power it instead of batteries. The unit has a
DC input jack on the left side of the tester. Plug the AC adapter’s output cable in
there. When the AC adapter is plugged in, the AC indicator on the LCD will be
displayed.

NOTES:

1. Power is supplied by the AC adapter when it’s plugged in even if the battery is

installed. The battery is not displayed on the screen when the AC adapter is
plugged into the unit.

2. Make sure the operating voltage of the AC adapter/charger is the same as the

local AC line voltage.

«
...
6
7
8
9
10
...
»

Summary of Contents for FOOBL

















Reviews:

No comments