manualshive.com logo in svg

Black Box FOOBL, Manual, Page: 11 / 16

Share
Download
Black Box FOOBL Manual Download Page 11

Page 11

724-746-5500   |   blackbox.com

 

Chapter 4: Operation

4.3 LCD

Figure 4-2 illustrates the LCD display panel. 

Refractive index

 
Refractive rate

Results display

Units in meters

Power on/off

AC adapter 

Battery charge 

Storage position 

Storage position sign

Active laser indicator

Figure 4-2. LCD display panel.

4.4 Before Using the Optical Break Locator

1. Make sure the fiber connector is clean before testing.

2. If the batteries need to be recharged, use the charger. 

3. Cover the fiber connector with the protective dust cap when it is not in use.

4.  Do not connect the laser source to this instrument directly. Optical sensors might 

be damaged.

5.  Make sure the test fibers are securely connected before testing. You can’t  

pull out the fiber during testing because the refractive effects may damage  
the instrument.

WARNING:

  Do not look directly into the light pulse generated by the instrument. 

Your eyes might be damaged.

4.5 Using the Keys

To turn the instrument on and off:

1. Press the “ON/OFF” key for less than two seconds to power on the unit.

Summary of Contents for FOOBL

















Reviews:

No comments