3
2.1 SPECIFICATIONS
TABLE 2-1. GENERAL SPECIFICATIONS
SPECIFICATION
DESCRIPTION
Measurement Range
0 to +60V or -60 to 0VDC
Ground
Isolated ground for protection against a differential ground between the target device and the
sensor
Range
Full auto ranging from -60VDC to +60VDC and from -5VDC to +5VDC
Status Range
High Warning, Low Warning, High Critical, and Low Critical
Communications Cable
RJ-45 jack to sensor using UTP Cat 5 wire
Maximum extension cable length 60 feet with approved low capacitance shielded cable or UTP
Hardware setting modes
Wide Range Mode is -60 to +60 VDC with 0.01 V resolution and 1% accuracy.
High Resolution Mode is -5 to +5 VDC with 0.001 V resolution and 1% accuracy.
Accuracy
±1%. o Input Impedance: 1.6 Mohm when set at the High Scale (60 Volts maximum) and 1.1 Mohm
when set at the High Resolution Mode (5 volts maximum).
Power Source
Unit provides power, so no additional power is needed.
Power Supply
12V/3A DC (US/EU standards, CE/FCC/UL certified)
Voltmeter auto detection?
The unit auto detects the presence of the Isolated Digital Voltmeter.
Measurement Rate
Multiple readings every second
Autosensing?
Full Autosense including disconnect alarm
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 2: SPECIFICATIONS