10
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 5: ADDRESSING
5.1.3 TROUBLESHOOTING
Flashing backlight LEDs indicate a non-volatile memory ERROR. Try the Power OFF – Power ON sequence to restart the device and
set the ADDRESS again.
5.2 ADDRESSING THE BUILT-IN IR RECEIVER
5.2.1 ADDRESSING RULES
You can add an offset to a BUTTON_ID sent by the control panel using the IR receiver built into the keypad. It can be very helpful in
multi-room installation—the same ControlBridge can be identified in each room. That means one panel can initiate different actions
in different rooms—see an example in the picture on the next page.
