manualshive.com logo in svg

Black Box ControlBridge CB-ACC-232DCE-30, User Manual, Page: 39 / 52

Share
Download
Black Box ControlBridge CB-ACC-232DCE-30 User Manual Download Page 39

Page 39

877-877-2269   |   blackbox.com 

Chapter 6: Upload User Application

6.2 Using Admin Control Panel

Follow these steps:

1. Run ControlBridge Builder on your PC.

2.  Open a project in ControlBridge Builder. It’s necessary to have the appropriate controller properly inserted and configured.

3. Use the tool bar Final button to open the Upload and Export Application dialog box.

 
 

Final Button

Export As Application Files ...

Figure 6-2. Admin Web screen. 

4. Be sure your controller is checked.

5. Use the Export As... button and select Application Files ...to export an application and store it in file named *.cvca.

6. Connect the controller to your computer as described in the Connecting / ControlBridge Network chapter.

7.  Run the Internet browser on your PC and type in the same controller IP address that you see in the ControlBridge Builder 

project, Properties / IP address window.

8. Admin Control Panel is shown.

9.  Go to the System page and check the current firmware version. In case there is no actual controller firmware version, 

upload the firmware version that corresponds to the firmware version in the ControlBridge Builder project.

10. Go to the Applications page and upload the application file *.cvca.

11. Start the uploaded application by pressing the Start button.

Summary of Contents for ControlBridge CB-ACC-232DCE-30





















































Reviews:

No comments