Black Box AVSC-0802H, User Manual, Page: 56 / 60

Page 56 877-877-2269 | BlackBox.com
Appendix: RS-232 Command Set
24 Factory Reset RESET[CR/LF] RESET[CR/LF] — Command: RESET[CR/LF]
Response: RESET[CR/LF]
25 System Reboot REBOOT[CR/LF] REBOOT[CR/LF] — Command: REBOOT[CR/LF]
Response: REBOOT[CR/LF]
26 Enable/Disable
Standby SET STANDBY_
ONOFF prm[CR/
LF] STANDBY_ONOFF
prmCR/LF] prm = {on,off} Command: SET STANDBY_
ONOFF on[CR/LF]
Response: STANDBY_ONOFF on
[CR/LF]
27 Get Standby Status GET STANDBY_
STATUS [CR/LF] STANDBY_STATUS
prm[CR/LF] prm = {on,off} Command: GET STANDBY_
STATUS [CR/LF]
Response: STANDBY_STATUS
on [CR/LF]
28 Get selected target
f/w version GET VER target
[CR/LF] VER target
prm[CR/LF] target={mainmcu,
slavemcu,scalermcu1,
scalermcu2,ledmcu,webui}
prm = {…}// according to
actual f/w version Command: GET VER
mainmcu[CR/LF]
Response: VER mainmcu
1.2[CR/LF]
29 Get All target f/w
version Get VER all[CR/
LF] VER target prm
[CR/LF]
VER target prm
[CR/LF]
VER target prm
[CR/LF]
VER target prm
[CR/LF]
VER target prm
[CR/LF] target={mainmcu,
slavemcu,scalermcu1,
scalermcu2,ledmcu,webui}
prm = {…}// according to
actual f/w version Command:
GET VER all [CR/LF]
Response:
VER mainmcu 1.2[CR/LF]
VER slavemcu 1.3[CR/LF]
VER scalermcu1 1.3[CR/LF]
VER scalermcu2 1.3[CR/LF]
VER ledmcu1.1[CR/LF]
30 Set USBLink SET USBLINK
prm[CR/LF] USBLINK prm[CR/
LF] prm = {hdbt1, hdbt2}
The USB is linked to HDBT
IN 1 by default. Command: SET USBLINK
hdbt1[CR/LF]
Response: USBLINK hdbt1[CR/
LF]
31 Get USBLink Status GET USBLINK[CR/
LF] USBLINK prm[CR/
LF] prm = {hdbt1, hdbt2} Command: GET USBLINK[CR/
LF]
Response: USBLINK hdbt1[CR/
LF]