Black Box AVS-3200-R2 User Manual Download Page 32 | Manualshive

Page: 32 / 48

Black Box AVS-3200-R2 User Manual Download Page 32

32

CHAPTER 1: HEADLINE

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 6: TCP/IP CONTROL

This system divides into administrator and user mode.

Administrator mode: User name: admin; Password: admin (default setting, changeable via GUI)

User mode: User name: user; Password: user (default setting, changeable via GUI)

NOTE: Log in as admin can access more configuration interfaces than user. Here is a brief introduction to the interfaces.
It will enter the scene management interface (left) after login. This provides a direct scene switch. The chart below illustrates the
main structure of the GUI interfaces.

FIGURE 6-6. GUI INTERFACES MAIN STRUCTURE

The web-based GUI system can be divided into Switch Control and System Setting menu, but log in as user will only access Switch
Control.

Click the arrow rectangle icon at the left-bottom corner to enter Switch Control menu.

Click the gear icon at the left-bottom corner to enter System Setting menu.

«
...
30
31
32
33
34
...
»

Summary of Contents for AVS-3200-R2

















































Reviews:

No comments