manualshive.com logo in svg

Black Box Agility Zero-U ACR500DP-T, User Manual, Page: 24 / 59

Share
Download
Black Box Agility Zero-U ACR500DP-T User Manual Download Page 24

24

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

USB SETTINGS 

ENABLE DUMMY BOOT KEYBOARD

When ticked, the Agility Zero U Transmitter will report a virtual dummy boot keyboard to the attached PC to ensure that a 
keyboard is always reported when the PC boots up. The dummy boot keyboard uses one of the 13 USB endpoints, therefore if all 
13 endpoints are required elsewhere for USB devices (or a KVM switch only supports two HID devices) then it can be disabled by 
deselecting this option. See also 

Reserved Port Range

 below. 

HUB SIZE 

Using this option you can select whether the Agility Zero U Transmitter should report itself as a 13 or a 7 port USB hub. Some USB 
hosts are only able to support 7 port USB hubs. If this option is set to 7, then only 7 USB devices are supported by the PC. 

RESERVED PORT RANGE 

For some devices, e.g. touch screens, you may wish to ensure that they are always reported to the same USB port number so that 
the USB driver will always find the device. This option allows you reserve up to 8 ports for certain devices. At the remote unit, 
the devices are assigned to the reserved ports. If a port reservation is to be applied, then the dummy boot keyboard should be 
disabled. The default value for this option is ‘0’, i.e. 

disabled

.  

TO GET HERE

1 

Connect your computer to the network port

 on the front panel.

2  Run a web browser and enter the IP address of the unit: 

http://169.254.1.33 

If the address is unknown, perform a 

manual factory reset

.

3  If necessary, click the 

USB settings

 link.

Summary of Contents for Agility Zero-U ACR500DP-T




























































Reviews:

No comments