manualshive.com logo in svg

Black Box Agility Zero-U ACR500DP-T, User Manual, Page: 10 / 59

Share
Download
Black Box Agility Zero-U ACR500DP-T User Manual Download Page 10

10

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

3.1.3 USB AND POWER CONNECTIONS

The Agility Zero U Transmitter is designed to be as flexible as possible. It can either operate using an optional external power 
adapter (see page 3) or derive all of its power from its two USB plugs. The main advantage offered by using an external power 
adapter is that it allows the Agility Zero U Transmitter to be active before the host computer; thus allowing a remote user to 
access the host’s initial boot up and access the BIOS menu, when required.
If powered by USB only, then both the black and red USB plugs need to be connected.
If powered by external power adapter, only the black USB plug needs to be connected, for signal purposes. Whenever, the external 
power adapter is attached and operating, then power will be taken from it rather than the USB plugs. There is no problem if the 
red USB plug remains connected while the power adapter is used.
This is summarized as follows:

 Power 

Black 

Red 

  

 adapter 

USB 

USB 

Power sourcing behavior

 

û

 

ü

 

ü

 

Power taken from both USB plugs.

 

ü

 

ü

 

û

 

Power taken from power adapter only.

 

ü

 

ü

 

ü

 

Power taken from power adapter only, unless it becomes unavailable, in which case power  

 

 

 

 

will be taken from both USB plugs after a short interruption.

Note: The USB plugs do not operate as a seamless failover for the external power adapter; there will be a short interruption as 

Host computer 

USB ports

Black USB plug provides USB 

signals (plus power if the 

external power adapter is not 

present)

Red USB plug provides power 

only when the external power 

adapter is not present

WW

W.B

LAC

KB

OX

.CO

M

WW

W.B

LAC

KB

OX

.CO

M

From the optional 

external power 

adapter

operation switches from one power source to 
the other.     

Summary of Contents for Agility Zero-U ACR500DP-T




























































Reviews:

No comments