manualshive.com logo in svg

Black Box ACX048, Manual, Page: 95 / 228

Share
Download
Black Box ACX048 Manual Download Page 95

Page 95

724-746-5500   |   blackbox.com

 

Chapter 4: Configuration

Figure 4-8. Menu File > Report.

NOTE:  The report function can be used in both On-line or Off-line mode of the 

Java tool.

4.2.3 Control via Serial Interface

Figure 4-9. RS-232 icon.

The ServSwitch DKM FX operating system offers various functions for external 
RS-232 (serial) communication. There are telegrams for switching single or all  
connections available, both unidirectional and bidirectional. There are also  
telegrams for an overall definition of the total switching status and for saving  
and loading such switching states.

The ServSwitch DKM FX has an option that provides an echo of all affected 
switching operations via serial interface or network interface. This will allow the 
system to communicate with other applications and provide switch status. 

You can also switch sub-master DKM FX or FXC clones as slaves (stacking) via a 
serial network interface.

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments